Benefits of Flushing Your Coolant – Vancouver Auto Repair
Do you know what keeps your engine cool when it runs? Do you know what keeps your engine
warm when the temperature drops below freezing? Would you believe the answer is the same
for both? Most people know that anti-freeze protects your engine when the sub-freezing
weather hits. But anti-freeze is also called coolant because it protects your engine from
Coolant transfers and evacuates excess heat from your engine to protect it from getting too
hot. Engine coolant is pretty basic, but some vehicles use only a specific type of coolant, so it’s
important to know which type your vehicle takes before replacing it or topping it off. And
speaking of replacing your engine coolant, do you know the last time you had this important
When Should You Get a Coolant Flush?
If you’re not sure, then you should probably at least get the coolant checked to be sure it’s
clean and your vehicle has the proper amount. If it has been a while, then it likely will need to
be flushed. A coolant flush is an important maintenance service, and it will protect your engine
from possible damage. Generally, it’s a good idea to have this done about every 30,000 miles.
Why Should You Get a Coolant Flush?
There are several good reasons to get a coolant flush, and to have this service done regularly.
And they’re all associated with keeping your entire coolant system operating correctly and in
turn protecting your engine.
Coolant Flush Benefits
Coolant flushes help rid your coolant system of dirty deposits, which build up over time.
These deposits can cause your engine to overheat and damage it and/or the entire
cooling system, so removing them is essential.
Modern coolants come with additives to help lubricate the water pump, which makes it
last longer. By doing a coolant flush you can ensure that the lubricating material in the
antifreeze is still in working condition.
Those same additives also wear out and deteriorate over time. That allows rust and
other contaminants to build up in the engine and water pump. This can cause energy
deterioration. A coolant flush will prevent this from happening.
When you get your coolant system flushed, we also inspect the entire cooling system,
including the radiator, thermostat, belts, and coolant hoses. If there are any other
problems, like leaks or broken or worn parts, we can detect them during a standard
Old coolant tends to become acidic, which causes problems in your cooling system.
Acidic coolant can damage the water pump, corrode, and break down rubber hoses, and
allow metal components to enter the engine block.
Signs of Coolant Issues
If you’re not sure what to look for, here are a few signs that your coolant is past its prime. The
most obvious thing to consider is the age of your vehicle and how long it’s been since you last
had this service. Another sign the coolant has issues is overheating. If your car overheats, the
cooling system needs to be checked. Lastly, if the check engine light comes on or the
thermostat/Temperature gauge is giving high readings, your cooling system needs some work.
Come to Hoesly Automotive for Your Next Coolant Flush
If you haven’t treated your vehicle to a coolant flush in about 30,000 miles or more, then it’s
time to get it done. So, please contact us today at Hoesly Eco Automotive for a high-quality
coolant flush from one of our experienced ASE certified technicians.
Make sure your engine is getting the right amount of fluid at the right time to keep it running
smoothly. And if you need any other service or repair, then please contact Hoesly Eco
Automotive today. You can reach us by phone at 360-695-5871 or click here to set up an
We are your trusted auto repair shop for numerous makes and models, including:
Mazda auto repair in Vancouver, WA
Subaru auto repair in Vancouver, WA
Toyota auto repair in Vancouver, WA
Nissan auto repair in Vancouver, WA
Hybrid auto repair in Vancouver, WA
Chevy auto repair in Vancouver, WA
Ford auto repair in Vancouver, WA
Honda auto repair in Vancouver, WA
Chrysler auto repair in Vancouver, WA